Information about the package, dia-electronic, which is shipped with common Linux distributions. The dia-electronic package is designed for, Dia Digital IC logic shapes.
Package Name:
dia-electronic
Summary:
Dia Digital IC logic shapes
Description:
The following shapes are included in the package: * Antenna * Bell * Button * Capacitor * Electrolytic capacitor * Crystal * Di-Gate * Diac * Engine * Headphone * Inverse diode * Schottky diode * Tunnel diode * Zenner diode * Inductor * LED display * Microphone * Photo-emiting part * Photosensitive part * Potenciometer * Ground * Contact * Contact Pair * IN Port * OUT Port * IN/OUT Port * Voltmeter * Ampermeter * Source or Meter * Current source * Substitute linearised source * Voltage source * Alternating voltage source * Direct voltage source * Bipolar transistor NPN * Bipolar transistor NPN * Bipolar transistor PNP * Bipolar transistor PNP * JFE transitor - N * JFE transistor - P * MISFE conducting transistor - N * MISFE conducting transistor - P * MISFE inducting transistor - N * MISFE inducting transistor - P * Single ..... transistor * Triac * Diode tyristor, blocking * Triode tyristor, blocking * Vacuum diode * Vacuum pentode * Vacuum triode * Linear variable part * Nonlinear variable part * Varicap
Architecture:
noarch
Version:
0.1
Release:
1.el6
Size:
42 k
Repository:
epel
From Repository:
Licence:
GPLv2+
Control the dia-electronic package with the following handy commands outlined below.
yum install dia-electronic
This command will install dia-electronic on the server.
yum remove dia-electronic
This command will un-install dia-electronic on the server. When you run this command, you will be asked if you are sure that you want to remove dia-electronic, so you have to manually confirm that you want to do this.
yum -y remove dia-electronic
This command will un-install dia-electronic on the server. When you run this command with th e -y flag, you will not be prompted to check that you are sure you want to remove the package - so be sure you absolutely want to remove dia-electronic when using the -y flag.
yum update dia-electronic
This command will update dia-electronic to the latest version. When you run this command, you will be asked if you are sure that you want to remove dia-electronic, so you have to manually confirm that you want to do this.
yum -y update dia-electronic
This command will update dia-electronic to the latest version. When you run this command with the -y flag, you will not be prompted to check that you are sure you want to remove the package - so be sure you absolutely want to remove dia-electronic when using the -y flag.
yum info dia-electronic
This command will show you core information about the dia-electronic package.
yum deplist dia-electronic
This command will show you the dependencies for dia-electronic. Thankfully, when using Yum, if dependencies are required, these are also installed at the same time so you don't have to worry too much about that.
yum check-update dia-electronic
This command will check if there is an update waiting on dia-electronic. When you run this command this will return nothing if there is nothing to update, or, will return the package name if the package is due to be updated.