Information about the package, openscada-DAQ-SNMP, which is shipped with common Linux distributions. The openscada-DAQ-SNMP package is designed for, Open SCADA DAQ.
Package Name:
openscada-DAQ-SNMP
Summary:
Open SCADA DAQ
URL:
Description:
The openscada-DAQ-SNMP allows realising of SNMP client service.
Architecture:
x86_64
Version:
0.7.2
Release:
1.el6
Size:
44 k
Repository:
epel
From Repository:
Licence:
GPLv2
Control the openscada-DAQ-SNMP package with the following handy commands outlined below.
yum install openscada-DAQ-SNMP
This command will install openscada-DAQ-SNMP on the server.
yum remove openscada-DAQ-SNMP
This command will un-install openscada-DAQ-SNMP on the server. When you run this command, you will be asked if you are sure that you want to remove openscada-DAQ-SNMP, so you have to manually confirm that you want to do this.
yum -y remove openscada-DAQ-SNMP
This command will un-install openscada-DAQ-SNMP on the server. When you run this command with th e -y flag, you will not be prompted to check that you are sure you want to remove the package - so be sure you absolutely want to remove openscada-DAQ-SNMP when using the -y flag.
yum update openscada-DAQ-SNMP
This command will update openscada-DAQ-SNMP to the latest version. When you run this command, you will be asked if you are sure that you want to remove openscada-DAQ-SNMP, so you have to manually confirm that you want to do this.
yum -y update openscada-DAQ-SNMP
This command will update openscada-DAQ-SNMP to the latest version. When you run this command with the -y flag, you will not be prompted to check that you are sure you want to remove the package - so be sure you absolutely want to remove openscada-DAQ-SNMP when using the -y flag.
yum info openscada-DAQ-SNMP
This command will show you core information about the openscada-DAQ-SNMP package.
yum deplist openscada-DAQ-SNMP
This command will show you the dependencies for openscada-DAQ-SNMP. Thankfully, when using Yum, if dependencies are required, these are also installed at the same time so you don't have to worry too much about that.
yum check-update openscada-DAQ-SNMP
This command will check if there is an update waiting on openscada-DAQ-SNMP. When you run this command this will return nothing if there is nothing to update, or, will return the package name if the package is due to be updated.